Balboa BP7 and TP500 Retro Fit Spa Control with 4.0kW Heater 50-BP7-500-40-K
Balboa BP7 and TP500 Retro Fit Spa Control with 4.0kW Heater 50-BP7-500-40-K
BP7 Water Pro Series, 4.0Kw, w/TP500 Spaside, 3 Circuits and is the best fit for spas with 1 or 2 pumps and a circ pump. For more pump options be sure to pair the proper top side to your BP7
Includes:
BP7 Control with 4.0KW Heater
Topside TP500 6 button topside
Adapter plate
Light Harness and LED light
This is a programmable system that can be configured several different ways.
NOTE- All circuits ship at 220 volts, please refer to instructions to convert a circuit to 120 volts.
In Setups 1-15, Pump 1, Circ Pump and Ozone must be the same voltage. In Setups 16-20, Pump 2 (when used), Circ Pump and Ozone must be the same voltage.
REPLACEMENT NOTE: Retrofit- Check measurement on topside. Verify number of pumps and blowers. Please see substitute options.
Balboa BP7 and TP500 Retro Fit Spa Control with 4.0kW Heater 50-BP7-500-40-K
BP7 Water Pro Series, 4.0Kw, w/TP500 Spaside, 3 Circuits and is the best fit for spas with 1 or 2 pumps and a circ pump. For more pump options be sure to pair the proper top side to your BP7
Includes:
BP7 Control with 4.0KW Heater
Topside TP500 6 button topside
Adapter plate
Light Harness and LED light
This is a programmable system that can be configured several different ways.
NOTE- All circuits ship at 220 volts, please refer to instructions to convert a circuit to 120 volts.
In Setups 1-15, Pump 1, Circ Pump and Ozone must be the same voltage. In Setups 16-20, Pump 2 (when used), Circ Pump and Ozone must be the same voltage.
REPLACEMENT NOTE: Retrofit- Check measurement on topside. Verify number of pumps and blowers. Please see substitute options.
Balboa BP7 and TP500 Retro Fit Spa Control with 4.0kW Heater 50-BP7-500-40-K
BP7 Water Pro Series, 4.0Kw, w/TP500 Spaside, 3 Circuits and is the best fit for spas with 1 or 2 pumps and a circ pump. For more pump options be sure to pair the proper top side to your BP7
Includes:
BP7 Control with 4.0KW Heater
Topside TP500 6 button topside
Adapter plate
Light Harness and LED light
This is a programmable system that can be configured several different ways.
NOTE- All circuits ship at 220 volts, please refer to instructions to convert a circuit to 120 volts.
In Setups 1-15, Pump 1, Circ Pump and Ozone must be the same voltage. In Setups 16-20, Pump 2 (when used), Circ Pump and Ozone must be the same voltage.
REPLACEMENT NOTE: Retrofit- Check measurement on topside. Verify number of pumps and blowers. Please see substitute options.
